m menu image  m home m cart

Br-SDC8

$607.22

Quantity:     
Package Contents:
1 - Br-SDC8
1 - GilderThumbDrive w/Software & Manuals
Suggested Accessories

Multiplexed Serial Device Controller

The Br-SDC8 is a complete, stand-alone Serial Output Controller. The Br-SDC8 adds eight multiplexed RS-232 serial ports. It is used whenever you need to control eight devices that need strings of RS-232 serial data. It can be used to with nearly any RS-232 serial controlled devices. The Br-SDC8 can be controlled from Gilderfluke & Co.'s Show Control Systems, PLCs or any other control systems. Just attach some buttons, and you can make your own interactive video kiosk.

The Br-SDC8 can be set to send strings on power up or in response to any of its ten optoisolated inputs. Different actions can be taken on the opening or closing edges of any inputs. The Br-SDC8 can then branch to a different serial string or ‘show’ in response to the string.

Features of the Br-SDC8 include:
  • Fifteen different serial strings of up to 127 characters each.
  • Fifteen different serial strings of up to 127 characters each.
  • Plug it into the RS-232 serial port on a PC to configure.
  • ‘Write Protect’ switch protects against accidental configuration changes.
  • Ten optoisolated inputs to synchronize Br-SDC8s with pushbuttons, realtime events and other control systems. Two of the inputs use screw terminals. The other eight use a standard 1/4 J6 connector. These can be used in ‘binary’ mode to connect a binary coded keypad.
  • Different actions can take place on opening and closing edges of inputs.
  • Strings can include ‘delays’ of one frame to over nine hours.
  • The Br-SDC8 can send a different string, or play a different show if any string gets an incorrect serial response from the device it is controlling.
  • Built in commands for Pioneer LaserDisc & DVD players, or Sony LaserDiscs.
  • br-sdc
  • Also acts as single RS-232/422 to eight RS-232 serial port multiplexer.
  • Uses ‘AT+++’ commands to switch which ports are routed in and out.
  • The Br-SDC8 runs on anything from nine to twenty-four vdc. It includes a small nine vdc ‘wallwart’ power supply. 110 vac standard, 220 vac on request.
  • Mount Br-SDC8s by screw standoffs, or in 2-3/4" Augat ‘Snap Track’.
Br-SDC8 Suggested Accessories:
Input Devices
RS-232
RS-422
TOG-021
Mp3-50-81
Mp3-50/8c1
Mp3-50/401
Mp3-50/40c1
Sd-50/WWV81
Sd-50/WWV401
Output Devices
RS-232
DMX-512 I/O Devices
N/A
Serial I/O Devices
Sd-RS/232
USB-RS232/422
DVD Player
Laser Disk Player
Mp3-50-8
Mp3-50/8c
Mp3-50/40
Mp3-50/40c
Sd-50/WWV8
Sd-50/WWV40
Mounting Options
Screw Down
Misc.
N/A

1 Requires 1/4 J6 Cable



Back




Copyright © 2017 Gilderfluke & Co.. Design by Duckweb Studio